Dr. Suhas

Areas of Interest

No areas of interest listed.

Ph.D. Supervision

No research supervision details available.

Awards / Grants

No awards or grants details available.

Journal

• 1. Jaimon Dennis Quadros, Hanumantharaya, Suhas, NL Vaishak, SS Balakrishna, Mahesh B Davangeri “ Analysis of Variance (ANOVA) and Response Surface Analysis of Thrust Force and Torque in Drilling Granite Fiber Reinforced Epoxy Composites by Using Multi Facet HSS Twist Drill” Procedia material science, vol. 5, pp. 1660-1669, 2014.
• 2. Jaimon Dennis Quadros, Suhas P and Vaishak N. L. “A numerical study for determining the ideal operating speed for a two-wheeler rider on varying terrain amplitudes” Journal of Mechanical Science and Technology, vol. 30, pp. 2435-2442, 2016.
• 3. Suhas, Jaimon D. Quadros and N. L. Vaishak, “Evaluation and Characterization of Tensile Properties of Short Coated Carbon Fiber Reinforced Aluminium Alloy Metal Matrix Composites via Liquid Stir Casting Method” Material Science Research India, vol. 13 pp. 66-73, 2016. DOI: 10.13005/msri/130202
• 4. Jaimon D. Quadros, Suhas and Vaishak N. L., “Failure Analysis of Woven Glass Fiber Reinforced Epoxy Plastic Composite Laminates by Drilling Using Finite Element Method” American Journal of Materials Science 2017, vol. 7, pp. 78-82, 2017. DOI: 10.5923/j.materials.20170704.02
• 5. P. Suhas, N.L. Vaishak and J. D. Quadros, “Dry Sliding Wear Behavior of AA Reinforced Short Coated Carbon Metal Matrix Composites” Journal of Advanced Manufacturing Technology (JAMT), vol. 11, pp.115-128, 2017.
• 6. Jaimon D. Quadros, Vaishak N. L., and Suhas, “Evaluation of Mechanical Properties of AA Reinforced with Short Coated Carbon Metal Matrix” American Journal of Materials Science, vol. 7, pp. 102-10, 2017. DOI: 10.5923/j.materials.20170704.07
• 7. R. Hanumantharaya, N.L. Vaishak, Suhas, MaheshB. Davanageri, Jaimon Quadros, B.G. Prem kumar ,“Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites” materials today: proceedings, vol. 5, pp. 7947-7953, 2018. DOI: 10.1016/j.matpr.2017.11.477
• 8. Vaishak N L, Prashanth T and Suhas “Investigation of Wear Behavior of AS Forged Inconel 690 Super Alloy using Artificial Neural Networks” Journal of Manufacturing Engineering vol. 14, pp 129-133, 2019. DOI: 10.37255/jme.v4i3pp129-133
• 9. I. M. Navaneeth, Suhas Poojary, A Chandrashekar, Abdul Razak , Nasim Hasan , and Abdulaziz Ibrahim Almohana, “Damped Free Vibration Analysis of Woven Glass Fiber-Reinforced Epoxy Composite Laminates” Advances in Materials Science and Engineering, Hindawi, pp. 1-13, 2022. DOI: 10.1155/2022/6980996
• 10. Jaimon D Quadros, P Suhas, Sher A Khan, Abdul Aabid, Muneer Baig, Yakub I Mogul “Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets” Bulletin Of The Polish Academy of Sciences Technical Sciences, vol. 70, pp. 1-11, 2022. DOI: 10.24425/bpasts.2022.142654
• 11. M Navaneeth, P Suhas, BH Maruthi Prashanth, M Prashanth Pai, “Mechanical and Wear Studies on Epoxy Composites with Glass Fiber Reinforcement and Carbon Powder Fillers” Smart Materials and Manufacturing Technologies for Sustainable Development, pp. 49-56, 2023.
• 12. Suhas Poojary, Jaimon D Quadros, Prashanth Thalambeti, Hanumanthraya Rangaswamy and Ma Mohin, “Performance analysis of a gas turbine engine via intercooling and regeneration-Part 2” International Journal of Turbo & Jet-Engines, De Gruyter, vol. 4, pp. 917-927, 2024. DOI: 10.1515/tjj-2023-0096
• 13. Suhas P, Jaimon Dennis Quadros, Yakub Iqbal Mogul, Ma Mohin, Abdul Aabid, Muneer Baige and Omar Shabbir Ahmede , “A review on mechanical metamaterials and additive manufacturing techniques for biomedical applications” Materials Advances, Royal Society of chemistry, vol.6 , pp. 887-908, 2025. DOI: 10.1039/d4ma00874j
• 14. Mogul, Y. I., J. D. Quadros, P. Suhas, A. Aabid. “Machine Learning-Driven Backpropagation Neural Network for Robust Prediction of Surface Roughness in Ti6Al4V Abrasive Water Jet Machining with Experimental Validation.” Materials Today Communications, Elsevier, 2026, Article 114692. https://doi.org/10.1016/j.mtcomm.2026.114692 ,
• 1. R. Hanumantharaya, N.L. Vaishak, Suhas, MaheshB. Davanageri, Jaimon Quadros, B.G. Prem kumar ,“Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites” materials today: proceedings, vol. 5, pp. 7947-7953, 2018. DOI: 10.1016/j.matpr.2017.11.477
• 2. I. M. Navaneeth, P. Suhas, B. H. Maruthi Prashanth, "Mechanical and Wear Studies on Epoxy Composites with Glass Fiber Reinforcement and Carbon Powder Fillers" Advances in Science, Technology and Innovation, pp. 49–56, 2024.

Conference

• 1. Presented a paper titled “Analysis of Variance (ANOVA) and Response surface analysis of Thrust force and Torque in drilling granite fiber reinforced epoxy composites by using Multi facet HSS twist drill”, at International conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014) held at National Institute of Technology (NITK) Mangalore, Surathkal, India on March 2014..
• 2. Presented a paper titled “Optimization of machining parameters in drilling granite particulate reinforced epoxy composites by using grey relational analysis” in 8th Global Engineering, Science and Technology conference held at Novotel hotel world trade center, Dubai, UAE, on April 24-25, 2014.
• 3. Presented a paper titled “Drilling analysis of [0/90/0] oriented glass fiber reinforced epoxy plastic (GFRP) composite laminates” in International Conference on Polymer Composites (ICPC-2014) held at National Institute of Technology Karnataka (NITK) Surathkal, Mangalore, Karnataka, India, on December 19-20, 2014.
• 4. Presented a paper titled “Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites”,International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME17),held at National Institute of Technology- Tiruchirapalli, Tamil Nadu, India, March, 2017
• 5. Presented a paper titled " Mechanical and Wear Studies on Epoxy Composites with Glass Fiber Reinforcement and Carbon Powder Fillers", International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering”, held at NMAMIT, NITTE, Karnataka, India, December 19–20, 2023
• 6. Presented a paper titled " Enhancing the Traffic Safety : A comprehensive review of advanced driver assistance system", International Conference on Intelligent Mobility Systems, held at Sahyadri College of Engineering, Mangaluru, Karnatak, India, June 7-8, 2024-2024.
• 7. Presented a paper titled " A review on ROS2 in the development of Autonomous Driving Software Stacks" at 4th international conference on recent trends in mechanical Engineering Sciences - RTIMES25 held at SIT Valachil, Mangaluru, Karnataka, India, May9-10 , 2025
• 9. Presented a paper titled " Experimental Investigation of Thrust Force in Drilling E Glass Epoxy Hybrid Composites Reinforced with Areca Fiber" at International Conference on Advances in Mechanical and Aerospace Sciences- ICAMAS 2026 held at NIT Arunachal Pradesh, India, March 10-12, 2025.
• 9. Presented a paper titled " Comprehensive Assessment of Plastic Waste Management in Public Gathering Areas of Mangalore City Before and After the Implementation of Strategic Recommendations", International Conference on Mechanical Engineering, held at J N N College of Engineering, Shivamogga, Karnataka, India, June 25, 2026
• 1. Presented a paper titled "A Vortex Lattice Program for Steady State Aerodynamic Analysis of Aeroplane Wings of Rectangular Cross Section”, in National Conference on Recent Innovations in Mechanical Engineering RIME 2013 held at Shree Devi Institute of Technology, April 2013, Tumkur, Karnataka, India.
• 2.Presented a paper titled “An empirical study for enhancing efficiency and sustainability of solar flat plate collectors”, in First National Conference on Renewable Energy Systems and Engineering (NCRESE-14), Vivekananda College of Engineering and Technology, Puttur, India, November 2014.
• 3. Presented a paper titled “Processing municipal solid waste(MSW) using portable solid incinerator”in National Conference on Green Energy- Potentials & Applications (NCGEPA-2016) held on May 13-14, 2016 at Vivekananda College of Engineering and Technology, Puttur, India.
• 4. Presented a paper titled " Agricultural Robots :A different Approach- A Review" in National Level Conference "Jnanasangama 2017" held at VCET, Puttur, Karnataka on May 13, 2017.

Book / Book Chapter

• "Mechanical and Wear Studies on Epoxy Composites with Glass Fiber Reinforcement and Carbon Powder Fillers" Advances in Science, Technology and Innovation, pp. 49–56, 2024.

Attended

• 1. Participated in a workshop on “Computational Mechanics” at Sahyadri College of Engineering & Management, Mangalore, Karnataka, India, 18 May, 2013
• 2. Participated in a workshop on “FEEL TEACHER” learning and development intervention conducted by College of Leadership and Human Resource Development CLHRD at Sahyadri College of Engineering & Management, Mangalore, India, from 26 to 28 July , 2013.
• 3. Participated in a Faculty Development Program on “Theoretical Computation and Applied Mechanics” organized by Dept. of Mechanical Engineering, BMS college of Engineering, Bangalore from June 16-20, June, 2014. Under TEQIP-II Initiative.
• 4.Participated in a Workshop on "Continuum Mechanics" organized by VTU at VTU Regional Office, Nagarabavi, Bangalore on 3 November , 2014.
• 5. Attended the workshop on " Thermal Properties of Materials" Organized by Alva's Institute of Technology, Moodbidri, Karnataka from 27- 28Jan , 2015
• 6.Participated in International Workshop on " Stress Assisted Environment Damage in Structural Materials" held at IIT Madras from February 27 to March 2, 2015.
• 7. Participated in National workshop on " Tribology Frontiers in Design and Manufacturing" held at National Institute of Technology, Surathkal, India on 24-25 October , 2016.
• 8. Participated in Two days workshop on " Industrial Pollution Control" on account of World Environment Day- Connecting People with Nature organized by Department of Civil Engineering in association with Karnataka State Pollution Control Board-KSPCB" at Sahyadri College of Engineering and Management, Mangaluru from 9- 10 June , 2017.
• 9. Participated in a workshop on " Soft Computing & optimizing techniques in Mechanical Engineering" organized by Department of Mechanical Engineering held on 13-14 July , 2017.
• 10.Participated in seminar on " IPR: Significance in Business and Research" at Sahyadri College of Engineering and Management, Mangaluru on 6 October, 2018.
• 11. Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online FDP on "3D Printing & Design" Organized by Indian Institute of Technology Dharwad from 9-13, October 2020.
• 12. Participated & completed successfully AICTE Training And Learning (ATAL) Academy OnlineElementary FDP on "Industrial Automation using CNC and Intelligent Systems" organized by Manipal Institute of Technology, Manipal from16 -20, July 2021.
• 13. Participated in the FDP on "Robotics" by NPTEL, September 2022.
• 14. Participated in three day FDP on " IPR commercialization" on the eve of World IPR day held at Sahyadri College of Engineering and Management, Mangaluru, India between 24- 26, April , 2023.
• 15. Participated in the FDP on "Product Design And Development" by NPTEL, August 2023.
• 16. Participated in 5 day FDP on " Product Design Engineering using Fusion 360" conducted by ICT Academy held at Sahyadri Campus Mangaluru from August 28 to September 01, 2023.
• 17. Participated in the FDP on "Mechanism And Robot Kinematics" by NPTEL, October 2023.
• 18. Participated in 5 day online FDP on " Modelling, Processing and Characterisation of Composites" jointly organized by Department of MEchanical Engineering, NITK Surathkal and Central University of Karnataka, Kalaburagi from 13-17 Spetember, 2023.
• 19. Participated in the FDP on "Mechanism And Robot Kinematics" by NPTEL, October 2023.
• 20. Participated in two day FDP on " Outcome based Education and Assessment" held at Sahyadri College of Engineering and Management, Mangaluru from 10-11 Feb, 2024.
• 21. Participated in One day FDP on " The impact of Research and development on the education System" organized by Sahyadri College of Engineering and Management, Mangaluru in association with VTU, Belagavi on 10 Aug , 2024.
• 22. Participated & completed AICTE Training And Learning (ATAL) Academy Faculty Development Program on "Microwave Processing and 3D Printing of Functional Materials From Fundamentals to Future Technologies" organized by K.L.S. GOGTE INSTITUTE OF TECHNOLOGY, Belagavi from 2-8 Feb, 2025.
• 23.Participated in Two day FDP on " Patent Drafting and Commercialization" organized by IPR Cell and Department of Mechanical and Robotics Engineering, Sahyadri College of Engineering and Management, Mangaluru in association with Karnataka State Council for Science and Technology (KSCST) Bengaluru on 17-18 Feb, 2025.
• 24. Participated & completed AICTE Training And Learning (ATAL) Academy Faculty Development Program on "Sustainable Carbon-Free Technologies for Hydrogen Generation and Storage at National Institute of Technology Tiruchirappalli from Feb 24 to March 01, 2025.
• 25. Participated in " Hydgen Innovation Day 2025" organized by Hydrogen Innovation Pvt Ltd, Sahyadri Campus on 9 April, 2025
• 26.Participated in one day workshop on "Research Tools" organized by Dept of MERA, Sahyadri College of Engineering and Management on 3 June, 2025.
• 27. Participated in the FDP on" Research Methodology" by NPTEL, September 2025
• 28. Participated in the two-day Leadership Development Program titled "Scaling Ph.D. Excellence," organized by EPSI at VIT Chennai Campus during 14-15, November, 2025.

Organised

• A KSCST-funded project titled “Design and Development of Intelligent Mobility Support System for Physically Impaired Individuals using Robot Operating System and Machine Learning Models” was presented at the 48th Series of Student Project Programme on 1–2 August 2025 at JNNCE, Shivamogga.